Family Tree Instructions

Web Browser

  • Find shape
    • Try searching for silhouettes, outlines, and line drawings
  • The images to the right are examples of things you could use
  • Right click on image
  • Click copy image

Illustrator

  • Open Adobe Illustrator
  • File>Open>Family Tree.ai
  • Ctrl+V
  • If you want the image to cut:
    • With the image selected, click Image Trace, then click Expand
    • Deselect the image
    • Using the Direct Selection Tool (pictured to the right), Click the outer border of the image
    • Change back to the Selection Tool (pictured to the right)
    • Change the Fill to Nothing (pictured to the right)
    • Change the Stroke to 0.001 (pictured to the right)
  • Scale the image
    • For wood or acrylic, maximum size is 4 inches
    • For cardstock, make it fit in the space inside the sheet of paper in Valentines.ai
  • If you want text:
    • Click on the Text Tool
    • Click in an open space away from the candle cube
      • It’s important that you just click, don’t click and drag
    • Type in what you wanted to type
    • Click on the Selection Tool
    • Click and drag your text into place
  • File>Save As
  • Name it something creative that you’ll remember
  • Navigate to your flash drive (Removable Disk or USB Drive)
  • Click Save
  • Click Save again
  • Click OK

At The Laser

  • Open Adobe Illustrator
  • File>Open
  • Navigate to your flash drive (Removable Disk or USB Drive)
  • Find your file
  • Click Open
  • Place a sheet of wood in the laser
  • Move the box parts to the open space on the wood
  • File>Print
  • Click “Setup” in the bottom left corner
  • Follow the instructions below for your laser

Epilog Helix

  • Select the printer (Epilog Engraver (Right or Left)) from the list on the top (you may have to scroll to the left)
  • Click Preferences
  • Select Auto Focus
  • Select Combined under the Job Type
  • Enter the Raster/Vector settings (wood)
    • Raster:
      • Speed: 50
      • Power: 100
    • Vector:
      • Speed: 30
      • Power: 100
      • Frequency: 500
  • Make the piece size 24 in x 18 in
  • Click OK>Print>Print

Stay within an arm’s length of the laser while it’s running.

If something goes wrong, press stop.

Epilog Fusion M2

  • Select the printer (Epilog Engraver WinX64 Fusion (Copy1)) from the list on the top (you may have to scroll to the left)
  • Click Preferences
  • Select Auto Focus
  • Select Vector Grid
  • Set the Thickness to 0.12 in
  • Select Combined under the Job Type
  • Enter the Raster/Vector settings (wood)
    • Speed: 65
    • Power: 100
    • Vector:
      • Speed: 14
      • Power: 100
      • Frequency: 10
  • Make the piece size 24 in x 18 in
  • Click OK>Print>Print

Stay within an arm’s length of the laser while it’s running.

If something goes wrong, press stop.

Assembly

  • Line up the tree with the base and push them together
  • Open the jump rings
  • Locate where each name goes
  • Put the jump ring on the name leaf
  • Close the jump ring on the branch
    • Check that the name is facing the front of the tree before closing the jump ring
  • Repeat for the rest of the names

X
X